Multiquip Generator DCA400 Manual de usuario descargar pdf (Pagina 1)

DCA400 SERIES — FUEL RETURN LINE KIT INSTRUCTIONS P/N 35499 — REV. #0 (01/26/11) — PAGE 1

DCA400 Series Generator

Fuel Return Modiﬁcation

The following instructions are intended to assist the user in the installation of the Fuel Return Line Kit for use on the

DCA400 Series generators affected by Service Bulletin GSP20110113. Please read all assembly instructions before

installing the kit.

REQUIRED TOOLS

 13mm socket or wrench

 Flat blade screwdriver

 Pliers

 Wire cutters

 Pipe sealant

PARTS

Verify that all parts are accounted for. See Figure 1 and

Table 1.

Figure 1. Return Fuel Line Kit

INSTRUCTIONS

WORK SAFELY!

Only a qualiﬁed service technician with proper training

should perform this installation. Follow all shop safety rules

when performing this installation.

PREPARATION

1. Make sure generator is turned off and engine is cool.

2. Place the generator in an area free of dirt and debris

Make sure it is on secure level ground with chock blocks

underneath each wheel to prevent the generator from

rolling.

3. Disconnect negative battery cable from the battery.

4. Remove front cabinet panel to gain access to generator

fuel tank.

5. Remove trailer fuel tank cover to gain access to trailer

fuel tank.

Table 1. Return Fuel Line Kit

Item

No.

Part No. Description QTY. Remarks

1 35500 Kit, Return Fuel Line 1

Includes

items 2-11

Fitting, Bush 1/2FP x 3/4MP

Steel/Yel Zinc

Fitting, Tee, 3/4FP x 3/4MP x

3/4FP

4 Fitting, 3/4MP x 1/2 Barb, Brass 1

5 Clamp, Hose Worm #8 1/2-1.00 5

Hose, Fuel, 1/2" ID, Return

Extension, 53 in. (134.6 cm)

7 Fitting, Brass, 8 Barb x 8 Barb 1

Hose, Fuel, 1/2" ID, Vent,

24 in. (61 cm)

9 Tie, Cable Ty-Rap Black 10

10 Protector, Spiral Hose 1

11 35499 Instructions, Return Fuel Line 1

1 2 3 4 5 6

Indice de contenidos

Pagina 1 - DCA400 Series Generator

DCA400 SERIES — FUEL RETURN LINE KIT INSTRUCTIONS P/N 35499 — REV. #0 (01/26/11) — PAGE 1 DCA400 Series Generator Fuel Return ModiﬁcationThe follow

Pagina 2 - DISASSEMBLY

DCA400 SERIES — FUEL RETURN LINE KIT INSTRUCTIONS P/N 35499 — REV. #0 (01/26/11) — PAGE 2DISASSEMBLYFigure 2 illustrates the unit’s current fuel line

Pagina 3 - Existing 90º

DCA400 SERIES — FUEL RETURN LINE KIT INSTRUCTIONS P/N 35499 — REV. #0 (01/26/11) — PAGE 34. Disconnect drain hose from trailer return port. Se

Pagina 4 - INSTALL NEW VENT HOSE

DCA400 SERIES — FUEL RETURN LINE KIT INSTRUCTIONS P/N 35499 — REV. #0 (01/26/11) — PAGE 4INSTALL NEW RETURN EXTENSION HOSERefer to Figure 9.1. Connec

Pagina 5 - REASSEMBLY/TESTING

DCA400 SERIES — FUEL RETURN LINE KIT INSTRUCTIONS P/N 35499 — REV. #0 (01/26/11) — PAGE 52. Secure vent hose to engine return hose and engine feed ho

Pagina 6 - HERE’S HOW TO GET HELP

Your Local Dealer is:HERE’S HOW TO GET HELPPLEASE HAVE THE MODEL AND SERIALNUMBER ON-HAND WHEN CALLINGUnited StateSMultiquip Corporate Ofﬁce MQ Parts

Comentarios a estos manuales

Sin comentarios

Multiquip Generator DCA400 Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Generadores Multiquip Generator DCA400. Multiquip Generator DCA400 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Multiquip Generator DCA400 Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Generadores Multiquip Generator DCA400. Multiquip Generator DCA400 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Generadores Multiquip Generator DCA400