Multiquip DCA45SSIU4F Manual de usuario descargar pdf (Pagina 32)





1. Place the  circuit breakers

(Figure 34) in the OFF position prior to starting the

engine.

Figure 34. Main, Aux. and GFCI

Circuit Breakers (OFF)

2. Make sure the  has been

conﬁgured for the desired output voltage.

3. Connect the load to the receptacles or the output

terminal lugs as shown in Figure 10. These load

connection points can be found on the output terminal

panel and the output terminal panel’s hard wire hookup

panel.

4. Tighten terminal nuts securely to prevent load wires

from slipping out.

5. Close all engine enclosure doors (Figure 35).

Figure 35. Engine Enclosure Doors

CAUTION

The engine’s exhaust contains harmful emissions.

 

Direct exhaust away from nearby personnel.

WARNING

 manually start the engine with the main, GFCI

or auxiliary circuit breakers in the ON (closed) position.

INCORRECT

CORRECT



1. Place the Auto-Off/Reset Manual Switch in the

position to start the engine (Figure 36).

Figure 36. Auto-Off/Reset Manual Switch

(Manual Position)

2. Once the engine starts, let the engine run for 1-2

minutes. Let engine idle longer in cold weather

conditions. Listen for any abnormal noises. If any

abnormalities exist, shut down the engine and correct

the problem.

3. The generator’s frequency meter (Figure 37) should be

displaying the 60 cycle output frequency in 

Figure 37. Frequency Meter

4. The generator’s AC-voltmeter (Figure 38) will display

the generator’s output in . If the voltage is not

within the speciﬁed tolerance.

Figure 38. Voltmeter

NOTICE

If engine fails to start in a speciﬁed number attempts,

the shutdown lamp will illuminate and the Auto-Off/

Reset Switch must be place in the Off/Reset position

before the engine can be restarted.

INSPECTION/SETUP

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 97 98

Comentarios a estos manuales

Sin comentarios

Multiquip DCA45SSIU4F Manual de usuario Pagina 32

Comentarios a estos manuales

Relacionado con productos y manuales para Generadores Multiquip DCA45SSIU4F