MULTIQUIP MVC88VTH Manual de usuario descargar pdf (Pagina 25)





Clean the spark arrester every 6 months or 100 hours.

1. Remove the 4 mm screw (3) from the exhaust deﬂector,

then remove the deﬂector. See (Figure 27).

2. Remove the 5 mm screw (4) from the mufﬂer protector,

then remove the mufﬂer protector.

3. Remove the 4 mm screw from the spark arrestor, then

remove the spark arrester

Figure 27. Spark Arrester Removal

SPARK

ARRESTER

DEFLECTOR

MUFFLER

PROTECT

5MM SCREW (4)

4MM SCREW (3)

4MM SCREW (1)

MAINTENANCE

4. Carefully remove carbon deposits from the spark

arrester screen (Figure 28) with a wire brush.

Figure 28. Cleaning The Spark Arrester

5. If the spark arrester is damaged and has breaks or

holes, replace with a new one.

6. Reinstall the spark arrester and mufﬂer protector in

reverse order of disassembly.

SPARK

ARRESTER

SCREEN

WIRE

BRUSH

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 75 76

Sin comentarios

MULTIQUIP MVC88VTH Manual de usuario Pagina 25