MULTIQUIP CD6CE13H18 Especificaciones descargar pdf (Pagina 24)

PAGE 24 — STOW CUTTER 1 CE — OPERATION MANUAL — REV. #2 (12/20/07)

STOW CUTTER 1 CE SAW — OPERATION

Restarting After Intervention

If cutting is interrupted where the engine stops or is turned off

while the blade is still in the cut:

a. Turn Engine Off switches to "OFF"

b. Raise the blade out of the cut

c. Restart the engine as described in the previous

section.

If cutting is interrupted where the blade is stuck in the cut:

a. Turn Engine Off switches to "OFF".

b. Remove the blade guard.

c. Remove blade mounting bolt and outer flange.

d. Maneuver the saw away from the stuck blade.

e. A parallel cut made next to the blade may be necessary

to free it.

f. Once the blade is freed inspect the blade for damage;

discard if damaged.

e Ensure an undamaged, useable blade is installed on

the saw before cutting is resumed with that saw.

The only acceptable method for freeing a stuck blade is to

remove the saw from the stuck or pinched blade. DO NOT

try to get the blade unstuck using the Raise/Lower system

or by lifting the saw by the lifting bale, etc.

CAUTION

Cutting Close to a Vertical Surface

Follow the following procedures when cutting up to a vertical

surface (wall, steps, etc.).

Use EXTREME CAUTION when

performing the the following operations:

WARNING!

c. Lift the guard up and back until the retaining spring

acts to hold the guard in the “up” posiiton.

d. Return to the operator postion between the handles.

e. Restart the blade rotation.

f. Carefully cut up to the vertical surface and then back

up enough to allow the blade guard to be lowered.

g. Stop the blade rotation.

h. Lower the blade guard to its original postion.

a. Stop blade rotation far enough from vertical surface to

permit lifting front section of blade guard.

b. Grasp the front section of the blade guard from the

outside only (NEVER extend fingers into guard!)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 33 34

Comentarios a estos manuales

Sin comentarios

MULTIQUIP CD6CE13H18 Especificaciones Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Herramientas De Jardín MULTIQUIP CD6CE13H18